Choose Parts Below
 
Flow Meter (B-Type)
Flow Meter (T-Type)
Flow Meter (G-Type)
Pumping Unit (B-Type)
Pumping Unit (T-Type)
Display
Keypad
Solid State Relay
Explosion Proof Valve
Pulse Sensor
Oil Viewing Device
Explosion Proof Motor
     
This incremental shaft encoder has been designed for heavy-duty application, especially for use in ptroleum & diesel dispensing environments where potentially explosive atmosphere can be expected. It features a rugged and compact construction as well as a wide selection of mechanical and electronic variations.
   
 
     
 
Housing : Die cast aluminum alloy
Bearings : Self-lubricating sintered bronze
   
The shaft encoder has been tested and granted Ex and EMC approval. The Ex-approval is EX d IIA T3.Ex certificate number is CE991209.
 
 
  • Power supply: 5VDC, fixed or variable
  • Current Consumption: Standard 10 to 30mA, max 90mA
  • Number of Channels: 2
  • Number of pulses: 50 ppr
  • Output Signal: Square wave duty cycle 50%+-10%
  • Phase Shift: 2 channels 90 degrees (25%+-5%)
  • Output Stage: NPN
  • Output Current: Max. 30mA
  • Hysteresis: Min. 0.2 degrees
  • Output freq. Min. 1000Hz
  • Temperature range: Working -40 degrees Celsius to +70 degrees Celsius
  • RPM: Max 3000RPM
  • Mounting: With 3pcs. M4 screws
  • Weight: Approx. 340g excl. the cable
 
 
The flow control valve has been tested and granted Ex-approval. The Ex-approval is EX m II T4.Ex certificate number is CE021037.
 
  • A high advantage in reliability and adaptability.
  • A large selection of shaft couplings, including couplings with built-in backlash clutch facility.
  • Standard sealing screws.
  • The fuel resistant cable can be customized regarding length.
  • Suit the Bennett SB-100 meter and other meters whose pulse per circle is 60.
  • 100% EX approved and tested.
 
Home